Proceedings 1999-2001

As of 07/14/2022

2001 | 2000 | 1999 |

<2001>

  1. Katsushi Furutani, Ryusei Kudoh, Naotake Mohri: Nanometer Cutting Machine Employing Parallel Mechanism, Proceedings of 16th Annual Meeting of American Society for Precision Engineering, Arlington, Virginia, USA, pp. 164-167 (2001)
  2. Katsushi Furutani, Motoya Furuichi, Naotake Mohri: Coarse Motion Performance of "Seal Mechanism" with Three Degrees of Freedom, Proceesings of the Third International Symposium on Linear Drives for Industry Applications (LDIA 2001), Nagano, Japan, pp. 295-299 (2001)
  3. Katsushi Furutani, Noriyuki Ohta, Masaru Ohta: L-shaped Seal Mechanism with 3 degrees of freedom, Proceedings of the 2001 International Symposium on Micromechatronics and Human Science, Nagoya, Japan, pp. 123-128 (2001)

Go to top

<2000>

  1. Katsushi Furutani, Akira Suetomi, Naotake Mohri: A Linear Drive Device to Feed Parallel Shafts Using Piezoelectric Actuators, Proceedings of the fifth International Conference on Motion and Vibration Control (Movic 2000), Sydney, NSW, Australia, 2, pp. 743-748 (2000).
  2. Tadashi Yamazaki, Naotake Mohri, Katsushi Furutani, Takeo Nakagawa: Powder Lamination Molding by Selective Laser Sintering, Proceedings of the 8th International Conference on Rapid Prototyping, Tokyo, Japan, pp. 155-159 (2000)

Go to top

<1999>

  1. Katsushi Furutani, Tomonao Katoh, Naotake Mohri: In-process Measurement of Wear of Grinding Wheel by Hydrodynamic Pressure, Proceedings of 14th Annual Meeting of American Society for Precision Engineering, Monterey, California, USA, pp. 159-162 (1999)
  2. Katsushi Furutani, Akinori Saneto, Hideki Takezawa, Naotake Mohri, Hidetaka Miyake: Surface Modification by Electrical Discharge Machining with Titanium Powder Suspended in Working Fluid, Proceedings of 14th Annual Meeting of American Society for Precision Engineering, Monterey, California, USA, pp. 159-162 (1999)
  3. Koshiro Yamakawa, Katsushi Furutani, Naotake Mohri: XYZ-stage for Scanning Probe Microscope by Using Parallel Mechanism, Proceedings of the 1999 ASME Design Engineering Technical Conferences (DETC99/ MOVIC), Las Vegas, Nevada, USA, pp. 8425/1-6 (1999)
  4. Mamoru Kosuge, Naotake Mohri, Katsushi Furutani, Hideki Takezawa, Hidetaka Miyake: Measurement of Discharge Positions in Electrical Discharge Machining with Various Kinds of Electrodes, Proceedings of IMEKO-XV World Congress, Osaka, Japan, p. 158, No. 14.1.3 (1999)

Go to top

論文リストへ

　

Last modified on 07/14/2022 at 12:38:18 by Katsushi Furutani